Telecom e-Services
Beta
DOT Mitra

FAQs

FAQs

The key factor in determining the time taken is the Lab readiness. Labs that have taken the time to prepare well for CAB Designation application, respond quickly to shortcomings, if any and clarifications sought if any during technical examination of documents of the lab and quick response to assessment deficiencies, can complete the process in a timely manner. TEC has all necessary resources, to designate a well-prepared Lab as CAB in a reasonable time of about 90 days. Some CABs were able to gain designation in less than 90 days.

The scope of designation by DA is limited to the scope for which accreditation is granted against TEC’s/ other Party’s technical standards and/or specifications. If the application for Designation as CAB/CB does not fully cover all tests corresponding to TEC’s technical standards and/or specifications, the DA may grant the designation corresponding to TEC’s technical standards and/or specifications to the extent against which designation is sought, subject to its technical evaluation by the DA.

Mutual Recognition means that each Party, on the basis that it is accorded reciprocal treatment by the other Party, accepts the test reports & certification of results of conformity assessment activities; and mandatory requirements of the other Party to demonstrate conformity of products and/or manufacturers/manufacturing processes with its mandatory requirements when the conformity assessment activities are undertaken by conformity assessment bodies designated by the other Party.

Telecom Engineering Centre (TEC) under the Department of Telecommunication (DoT) is the Designating Authority (DA) for designating Conformity Assessment Bodies (CABs) in India having its office at “Gate No. 5, Khurshid Lal Bhavan, Janpath, New Delhi-110001”

Mutual Recognition Agreement or Arrangements (MRAs) means an agreement through which two countries give recognition to Certifying Bodies and CABs in respective countries by following conformity assessment procedures.

Telecom Engineering Centre (TEC) under the Department of Telecommunication (DoT) designates domestic Conformity Assessment Bodies (CABs) for carrying out conformity assessment of telecommunication equipment in accordance with TEC’s technical standards and/or specifications.

Essential Requirement means set of parameters/standards/requirements/ Specifications etc. specified by TEC which are to be complied for seeking certification.

Non-refundable fee of Rs. 1,00,000/- to be paid online through Non Tax Receipt Portal (NTRP) of Govt. of India to “TEC, New Delhi” for designation against up to 5 TEC’s technical standards and/or specifications in a single application. Further, for designation beyond 5 technical standards/ specifications in the same application, an additional fee of Rs. 20,000/- is payable per standard/specification subject to maximum of up to Rs. 2,00,000/- per single application in any case or fees specified by DA time to time.

MRAs eliminate the cost of retesting and re-certification, and shorten timeto-market for partner countries’ manufacturers and exporters of telecommunication Equipments.M

Designating Authority (DA) means a body established in the territory of a Party with the authority to designate, monitor, suspend or withdraw designation of conformity assessment bodies to conduct conformity assessment activities within its jurisdiction.

CAB designation is not a one-time phenomenon. Once the CAB gets designated; Designation to a CAB shall be valid for a period of 3 years subject to continuity of NABL accreditation. CAB shall apply for renewal of designation to TEC within 180 days but not later than 60 days before the expiry of the CAB Designation.

Conformity Assessment Body (CAB) means a body that conducts conformity assessment activities.

Designation means the authorization by a Party’s designating authority of its Conformity assessment body to undertake specified conformity assessment activities pursuant to the mandatory requirements of the party.

Duly filled Application form for CAB Designation along with all requisite documents as mentioned in TEC CAB Designation Scheme should be sent/submitted to: 

DDG (MRA), Telecommunication Engineering Centre, Gate No. 5, Khurshid Lal Bhavan, Janpath, New Delhi-110001

At present India has “Mutual Recognition Arrangement/Agreement (MRA) with Singapore in Telecommunication Sector.

Application for renewal of CAB Designation as per Application format given in Annexure-5 of TEC CAB/CB designation Scheme along with all requisite documents can be submitted within 180 days but not later than 60 days before the expiry of the certificate. Suspended or withdrawn designation shall NOT be renewed during the suspended or withdrawn period. However, the process of renewal may be initiated in the suspended/withdrawn period.

Telecom Engineering Centre (TEC) under the Department of Telecommunication (DoT) designates domestic Conformity Assessment Bodies (CABs) for carrying out conformity assessment of telecommunication equipment in accordance with TEC’s technical standards and/or specifications.

CAB designation is not a one-time phenomenon. Once the CAB gets designated; Designation to a CAB shall be valid for a period of 3 years subject to continuity of NABL accreditation. CAB shall apply for renewal of designation to TEC within 180 days but not later than 60 days before the expiry of the CAB Designation.

NABL accreditation is pre requisite requirement for applying CAB Designation.

Duly filled Application form for CAB Designation along with all requisite documents as mentioned in TEC CAB Designation Scheme should be sent/submitted to: DDG (MRA), Telecommunication Engineering Centre, Gate No. 5, Khurshid Lal Bhavan, Janpath, New Delhi-110001